| |
| |
|
Dust & Recover System
Hopper to suit 2 blast pots, entire recovery system is powered by a single fan, no moving parts within the abrasive or dust collection side of system.
|
|
|
|
Multi Hopper Module
The Multi Hopper Module is made up of a central duct, and forms a hopper either side of the duct (2 hoppers wide x quantity determined by length). Abrasive and dust is drawn through an oriface at the base of each hopper into the central duct and carried to the Dust & Recovery System by air flow powered by the fan.
.jpg)
|
|
|
|
Blast Room with 3 Multi Hopper Modules
Under Construction
Three Multi Hopper Modules are set at even distances apart within the blast room, Heavy duty floor grating is set over the modules providing a flat level floor surface. Areas between the modules are lined with steel plate.
|
|
|
.jpg)
|
|
Double Dump Valve
Continuos dumping of dust or abrasive into open hopper or drum.
|
|
|
.jpg)
|
|
Dust & Recover System
Ventilates blast room, recovers abrasive from upto 3 Multi hopper modules located in blast room floor, connected by heavy duty rubber ducts, separates dust from reusable abrasive, stores abrasive ready to recharge blast pot, screens abrasive from coarse product.
|
|
|
| |
| |
|
|
Multi Hopper Blast Room
Blast room features 3 x 1M wide Multi Hoppers x 8M long, Track and Trolley System, Lighting, Rubber lined walls.
|
|
|
|
|
|
Panel Blast Room
Blast Room Structures can be provided as a bolt together steel panel construction. Fast installation, smooth internal surface. Provision for lighting and ventilation. Door safety interlocking.
|
|
|
|
 |
|
Multi Hopper Blast Room
Blast room working in foundry, includes track and trolley system for 4 tonne castings.
|
|
|
|
|
Dustech 8000 cfm Dust Collector
8000 cfm dust collector with drop out plenum
|
|
|
|
|
8000 cfm Dust Collector Fan
Generally fans are flange mounted to the side of dust collectors, reducing the foot print.
|
|
|
| |
| |
|
|
Blast Room Lighting
ABES pay special attention to the lighting requirements within the blast room. We provide exceptional lighting with fittings protected from dust and abrasive rebound. Effective sighting of the blast target is imperitive for efficient operation.
|
|
|
|
|
|
Clear Visability
The ventilation system and abrasive cleansing provided by the Multi Hopper combined with the Blastequip Dust and Recover System provides operators with clear visability of the job at hand.
|
|
|
|
|
Large Work
ABES Blastequip systems can be designed to suit a wide variety of work types from small componets to very large structures.
|
|
|
|
|
Mechanical Blast Room Systems
Bucket elevator, screw conveyor, scalping drums, storage hoppers, dust collectors. Systems designed to suit rooms and work requirements.
|
|
|
|
|
Operator Equipment
Blast Hoses, Nozzles, Dead man controls, Blast helments and breathing air systems for the comfort, safety and efficient operation of the blast room.
|
|
|
| |
| |
|
|
Panel Blast Room
|
|
|
|
|
Mechanical Recovery System
Bucket elevator, airwash, storage hopper, blast pot.
this system recovers abrasive from within the blast room with an under floor screw conveyor and returns cleaned abrasive to the blast pot.
|
|
|
|
|
Fabricated steel blast room
This room fabricated from 3mm steel plate features side lighting and overhead monorail system
|
|
|
 |
|
Dust Collection and Recovery
Dust collection and recovery systems can be located outside the building and remote from blastroom
|
|
|
|
|
.jpg)
